Example systems

Concept designs that show the sort of system we make, and how much of one you might ask us for.

Each example is written the way we would specify a real project: what the system has to do, how each layer is designed, where the layers meet, and how every requirement is tested. None of them is a delivered project, and none claims a measured result.

Full stack, or the layers you do not have

A connected device has four layers: the circuit board, the firmware that runs on it, the enclosure around it, and the platform that receives what it sends. In a full-stack project we design all four, and every joint between them is written down once and tested from both sides.

In a semi-stack project you already have one or more of the layers, and we design the rest. The joint between our layer and yours becomes a written agreement: a message format, a pin map, a board outline. The matrix shows the usual shapes. The tracker below is written as a full-stack project and the clock-in terminal as a semi-stack one, and each carries indicative costs.

Layer Full stack Device only Board and firmware Software only
Platform
Firmware
Board
Enclosure

A filled square is a layer we design. An outlined one is a layer you supply, with the joint between them agreed in writing.

The examples

The fleet vehicle tracker, pulled apartAn exploded view of the fleet tracker: the platform screen showing a fleet map, above the small tracker board with its modules and fuse tap lead, above the enclosure base, lined up on guidesPlatformBoardEnclosureOne specification

Fleet vehicle tracker

One small board, powered from a vehicle fuse, that reads the vehicle through a standard diagnostic dongle and sends position, motion and vehicle readings to a web platform. A fleet manager sees every vehicle on a map, with trips, alerts and device status.

The specification covers the board and its modules, the firmware that keeps readings through lost signal, a housing that mounts beside the fuse box, the platform, the joints between them, data protection, and a test for every requirement.

Read the specification

The site clock-in terminal, pulled apartAn exploded view of the clock-in terminal: the platform screen showing timesheets, above an ordinary tablet in a rugged case running the kiosk app, with the small card reader beside it on its lead, above the wall mountPlatformTablet and appReaderMount: yoursOne specification

Site clock-in terminal

A wall-mounted tablet where people clock in and out by tapping a card or entering a code, and a web platform that turns those events into timesheets a manager can approve and export. The tablet, case and mount are bought off the shelf to our checklist.

A semi-stack project: we supply the kiosk app, the platform and a small card reader of our own. The specification covers the buyer's checklist, the reader's firmware, the app, the platform, the joint to the customer's payroll software, data protection, and a test for every requirement.

Read the specification

Have a system like one of these in mind?

Tell us what it has to do, who will use it and which layers you already have. We will reply to arrange a conversation.